1 · Drawing and dimensions
If there is a technical drawing suitable for production, state its scale and revision. Cutting, creasing, perforation, and other processes must be distinguishable from each other. If there is no drawing, we can start with a dimensioned sketch, photograph, or sample information; the design need is evaluated separately.
2 · Material to be cut
Share the material type, actual thickness, grammage in paperboard, and surface treatments if any. Add the flute structure in corrugated board. This information helps evaluate the rule, creasing, and ejection solution.
3 · Cutting machine and sheet layout
Brand/model, sheet size, die chase, and the number of ups in the layout are required. A brand name like BOBST alone does not describe the machine format. Cylinder and mounting information is also required for rotary jobs.
4 · Auxiliary tooling and process scope
Clearly state if there is a request for stripping, blanking, or a special process. A new die, renewal of an existing die, and design work are not in the same scope. Check which jobs are included in the compared quotes.
5 · Delivery time and revision expectation
Share the date you need and whether the drawing is the latest revision. The delivery plan is determined after the technical scope and production conditions are clarified. It would not be correct to accept a general statement on the site as a definite duration or price commitment for every project.
Final check before sending your quote file
Specify the unit of measurement and scale in the dieline drawing; do not evaluate the file solely based on its appearance on the screen. If there are multiple files, explain which one should be taken as the basis. If you are adding an old drawing as a reference, separate it in the file name as "old" or "reference".
- File name: Let the job name, revision number, and date identify the same job.
- Drawing information: Cutting, creasing, perforation, and special processes should be shown with a separate line type or description.
- Dimension information: Inner dimension, outer dimension, and product dimension should be written separately from each other.
- Sample information: Mark the feeding edge, grain or flute direction, and problematic area on the photo.
You can review your file from the rule drawing and layer control guide. The form accepts PDF, DXF, CF2, EVD, PNG, JPG, and WEBP files; there is a limit of maximum 5 files and a total of 10 MB. The transmission of the file does not mean that its suitability for production has been approved.
Compare different quotes with the same job scope
Making a comparison solely based on the outer dimensions of the die or the total rule footage does not show that the quotes contain the same work. Check whether design and drawing preparation, cutting and creasing details, ejection rubbers, stripping and blanking tooling, and sample requirements are included in the scope.
Factors affecting cutting die prices and the difference between stripping and blanking help you prepare a request with the same technical details. Share your delivery expectation; the delivery plan is evaluated after the drawing, material, and tooling scope are clarified.
If your drawing is not ready, start with this information
Share the use of the product, dimensions, material type, and existing sample if any. State whether you want a new project, reorder, or revision. Write the existing die code for a reorder; write the changed dimension or line separately for a revision. If you do not know the exact model of your cutting machine, verify the machine and bed information with your production team.
Examine box closure and sample checks in paperboard projects, and flute structure and assembly checks in corrugated projects. Add machine and station compatibility for BOBST, and cylinder and mounting references for rotary projects to your request.
Send your drawing and project information from the quote form →
Frequently asked questions
Can a quote be obtained with just a photo?
A photo can initiate the initial evaluation. If scale, dimensions, material, and machine information are missing, additional information is required to clarify the quote scope.
Is the die price determined solely by footage?
No. Alongside the cutting line, geometry, process types, material, layout, and auxiliary tooling scope are also evaluated.