ÖZKARDEŞLER · Die selection

Guillotine cutter or steel-rule cutting die? The right starting point for your job

Sizing a rectangular print and getting a lidded box from that print are not the same cutting job. The correct request describes how the finished product should look and function before the machine's name.

What does the line to be cut do?

A guillotine is a cutting method used for sizing along a straight line. Trimming the straight edges of a card is an example of this. A round corner, suspension hole, window or locking tab requires a contour following the drawing. In a steel-rule cutting die, this contour is created with cutting rules brought into the appropriate shape.

Cutting the outer edges is not enough in a box dieline. Creasing lines, the tearing line if any, and how the product will separate from the sheet must also be described. A photo in the customer's hand can explain this purpose; a dimensioned drawing turns the same purpose into production data.

Define material and machine in the same file

The size of the print sheet is not the same information as the usable cutting area. The setup to which the die will be mounted, the feeding direction and the tooling height are also verified. Therefore, instead of writing just "for BOBST" or "for platen press", share the exact model and existing tooling information.

Paperboard, corrugated board and self-adhesive label can have different cutting targets even in the same contour. While protecting the liner is desired in a label, complete separation of the outer contour may be targeted in a paperboard box. Die selection makes these differences visible from the start.

Do not confuse quantity with-up count

The total product quantity in the order does not tell how many product contours are in the die. The up count is the number of products placed on a sheet. The same die is used repeatedly throughout production. In a quote request, specifying the total production quantity, sheet layout and reorder expectation separately facilitates evaluation.

  • Finished product dimensions and usage style.
  • Drawing separating cutting, creasing and tearing lines.
  • Material definition, thickness and surface treatments.
  • Machine model, sheet size and up layout.

Determine the correct scope with Özkardeşler

You can start by describing your product: A concrete description such as "windowed box", "tag with suspension hole" or "lockable corrugated box" carries more information than just asking for a "printer's rule". Let's discuss the required die scope by evaluating the drawing, sample and machine data together.

Frequently asked questions

Is the same die used for every shaped job?

No. As much as the contour, the material, machine and post-cutting processes also change the tooling preparation.

Can I request a die from a photo?

A photo is helpful for a start. Before moving to production, dimensions, material, drawing and machine compatibility are verified.

Explore other cutting die technical guides

Material- and product-specific guides