ÖZKARDEŞLER · Label material
Adhesive bleeding in label cutting: How should you compare material and die records?
Adhesive buildup on the label edge, difficult peeling, or residue on the die should be clearly described in the same technical record. Instead of explaining the issue simply as "the cutting is broken," showing material and production changes together makes the investigation easier.
Record the symptom you see and its location
On which edge does the adhesive appear? Does it occur on all up-registers, or is it noticed after a certain number of sheets? Answer these questions with a numbered register map and the feed direction. Compare new and previous production samples using the same reference.
Separate residues seen on the label surface, cutting edge, or die. Showing the general sheet and close-up view together in the photo clarifies which region is being examined.
Define all layers of the material
Surface, adhesive, and liner information must be in the same product record. The supplier product code, batch, and lamination change, if any, are noted. The same label dimension does not automatically repeat the same cutting result in a different layer structure.
Storage and production preparation conditions are based on the material manufacturer's recommendations. The sample to be used in the cutting die evaluation must be selected from actual production material.
Keep tooling and setup changes visible
Add recent interventions made to the rule, counter surface, or setup to the record. Decisions regarding pressure must be handled within the framework of the authorized operator and manufacturer instructions. Making multiple changes at the same time can hide which effect changed the result.
Liner damage and clean separation of the label are checked separately. Eliminating one symptom does not mean that all other cutting conditions are also correct.
Add to the examination request
- Problematic examples and successful examples for comparison.
- Material code, batch, liner, and surface treatments.
- Register map, direction, and die photos.
- Machine, cutting target, and recent changes made.
Evaluate the label die with Özkardeşler through the material and production record. Let us determine the appropriate subsequent check with the same data package.
Frequently asked questions
Is adhesive buildup caused solely by the rule?
Material, tooling, and production conditions are examined together; the exact cause is not determined by a single observation.
Is increasing the pressure sufficient?
A setup change cannot be recommended as a general solution. The liner, separation, and other symptoms are evaluated together with the authorized operator.
