ÖZKARDEŞLER · High-frequency welding and cutting dies

Separate the welding line and cutting contour in high-frequency welding and cutting die orders

The first question in a high-frequency welding and cutting die request is what result you want in the material. The sealing line, embossing appearance, and the outer cutting contour of the part are not the same task. Showing these functions separately in the drawing clarifies the scope of the requested tooling.

The plastic name alone does not prove suitability

High-frequency welding depends on the material's response to the electric field. Common applications such as PVC exist; however, it cannot be concluded that every thin or flexible plastic can be welded using the same method. The product code, layer structure, and actual sample must be evaluated together.

Seeing the name PE or PP in a material list is not proof that that material is directly compatible with standard high-frequency processing. If there are coatings and special layers, define them without withholding. Suitability is verified through the requested structure and process.

Put functions into separate layers in the drawing

Describe the boundary of the area to be welded, the contour to be cut, and the visible mark expectation separately. Show which face of the finished product will be visible and how the parts will overlap. Share an assembly example along with layer thicknesses.

Requesting cutting and welding in the same tooling or in separate stages may require different preparations. Do not assume that the operation sequence is certain based on a single expression "high-frequency rule".

Complete the machine information and trial target

The machine model, existing tooling clamping arrangement, and manufacturer document support the quote discussion. Machine settings are not deduced from this general guide. The weld, appearance, and dimension criteria to be checked as a result of the trial must be written in advance.

  • Material product code and all layers.
  • Dimensioned drawing with separated functions.
  • Machine and existing tooling information.
  • Finished sample, acceptance expectation, and quantity.

Forward your drawing and sample for the high-frequency welding and cutting die service provided by Özkardeşler. Let us determine the processing scope suitable for the material and machine together.

Frequently asked questions

Is having a PVC sample sufficient by itself?

The layer structure, thickness, processing target, and machine information are also required.

Are cutting and welding the same thing?

No. They are separate functions; if they are requested together, the tooling and processing scope is clearly defined.

Explore other cutting die technical guides