ÖZKARDEŞLER · BOBST and stripping
The difference between stripping and blanking: Why are waste stripping and blanking planned separately?
Even if the sheet has been cut, the job may not be complete. Removing unwanted waste and separating finished products from each other are production stages with different tasks. This distinction determines which tooling is required in a BOBST cutting die quote.
Stripping focuses on waste removal
During the stripping stage, external trim and, depending on the design, internal waste are removed from the product area. Windows, holes, and narrow waste strips must be addressed right from the cutting die design stage. A small waste piece remaining on the sheet can affect the operation of the subsequent stage.
Application depends on the machine stations, the auxiliary tooling used, and the sheet geometry. It should not be assumed that every BOBST model has the same stations or the same set.
Blanking separates finished cavities from each other
Blanking deals with separating finished carton dielines or products from each other. Completed stripping does not mean this task is also finished. The product separation method and subsequent stacking expectations are included in the evaluation of the relevant tooling.
Instead of using the phrase "stripping die" in the quote, write the operation you want clearly: Will internal window waste be removed, how will the outer frame be handled, and will the products come out as separate cavities in the machine?
The integrity of the sheet between stations is important
Nicks can help transport the sheet through controlled connections left on the cutting line. The position and size of the connections are evaluated based on the material, coating, geometry, and production conditions. The same nick width or count is not used for every job.
Rubbering is also related to the release of the sheet from the cutting die and its controlled movement. Evaluating the cutting die, stripping setup, and blanking expectations on the same sheet plan rather than treating them as separate orders helps foresee alignment issues in advance.
Information to be submitted for the BOBST set
- Exact machine model, stations, and existing tooling system.
- Sheet layout with specified references.
- Illustration of internal and external waste to be separated in the drawing.
- Material, thickness, and print/coating information.
- Blanking and delivery stack expectations.
Transmit the machine and tooling scope together to Özkardeşler. Let us evaluate the main cutting die and auxiliary tooling, if necessary, within the same job description.
Frequently asked questions
Are stripping and blanking the same thing?
No. Stripping removes unwanted waste; blanking handles the separation of finished products from each other.
Is a blanking tool required for every BOBST job?
The stations on the machine and the desired output are decisive. The exact model and production method must be verified.
