ÖZKARDEŞLER · Plastic cutting dies
How are contours and corners evaluated in PVC, PET and acetate cutting dies?
Two transparent sheets may look the same; they may not behave the same during cutting. In plastic cutting dies, along with the commercial material name, the product description, actual thickness, surface treatment, and desired edge result should also be shared.
Do not define the material solely by its appearance
PVC, PET, and different polyester sheets are separate product families. Clarify which material is meant by generic names like "acetate" used in the field with the product code. If there is a protective film, printing, or lamination, record these as well.
The sample to be used in die preparation must be made of the actual production material. Do not assume that a result obtained with another sheet automatically validates the same design.
Explain the sharp corner request together with its function
The appearance of the corner, its role in the assembly, and the radius that can be used must be specified in the drawing. Very tight turns and closely spaced lines are evaluated in terms of rule form and tooling setup. A suitable numerical limit cannot be recommended for all plastics without knowing the material and method.
Is what matters the appearance, a part fitting into the cavity, or positioning relative to the print? Making this distinction also determines what to look for in the control sample.
Clearly record the edge defect
Cracking, whitening at the corner, burr, or difficult separation are not the same defect. Show the faulty area with an overall view and a close-up; add which face of the part is up and the feed direction.
Rule bevel form, tool layout, counter surface, and machine conditions are handled together with the material. The die evaluation here is for steel-rule cutting; it is not a method or suitability declaration for plastic laser cutting.
Complete your quote file
- Dimensioned contour, critical corners, and final revision.
- Material product code, thickness, and uncut sample.
- Printing, protective film, and other surface layers.
- Machine model and tool layout.
- Acceptance expectation for edge appearance and assembly.
Discuss your plastic cutting die requirement with Özkardeşler over a material sample. Let us define the geometry and the result to be checked together before the quote.
Frequently asked questions
Is being transparent sufficient for the same rule selection?
No. The exact definition of the material, its thickness, and the cutting method are decisive.
Is the same radius given to every plastic inner corner?
Geometry, material, and process are evaluated together; a universal radius recipe is not used.
