ÖZKARDEŞLER · Leather and shoe upper

How are left-right pairs and size series checked in footwear cutting die orders?

In a shoe upper set, two parts that look identical may serve different functions. If the left-right matching, size, and material direction are not clear, even a correctly cut part may go to the wrong product during assembly. The beginning of the order is defining the parts one by one.

A part code is not just a file name

Give each part a code carrying the model, size, left-right information, and its function. Note that the body, lining, and backing part can have different geometries under the same size. Parts required in pairs and parts usable in both directions should be read separately in the approved parts list.

If a mirror image needs to be generated, show this clearly in the drawing. Rather than assuming each part can be used on the opposite foot simply by flipping it, check the left-right relationship of the design with a sample.

Manage the size series from a single master version

How a size change in one size is transferred to other sizes depends on the grading information of the design. Do not assume files prepared on different dates are the same series just because their names are similar. Share the last approved file together with the list of changed parts.

Record which size and which material the form liked in the sample belongs to. Describing size revision separately from material change makes comparison easier on reordering.

Specify material and cutting layout

Natural leather, synthetic leather, and backing material may not show the same behavior. The face, pattern, stretch direction, and usable quality zones can affect part placement. This information should appear in the production plan alongside the cutting die geometry.

Submit the model of the cutting machine to be used, the cutting method, and the material sample. Suitable blade and tooling structures are evaluated with this information.

A short tooling summary to be sent to Özkardeşler

  • Model code and size range.
  • Left-right separated parts list and required quantity for each part.
  • Dimensioned drawings, direction notes, and latest revision.
  • Material sample, machine information, and assembly example.

Evaluate your shoe upper cutting die request through a single part package with Özkardeşler. Let us clarify first the completeness of the tooling, then the drawing and sample compatibility.

Frequently asked questions

Are separate cutting rules always required for left and right?

It is evaluated based on part geometry, material face, and cutting layout. The same solution is not applied to all shoe upper parts.

Can a new size be prepared by enlarging the old drawing?

Grading and part matching depend on design knowledge; production is not started with the assumption of proportional scaling alone.

Separate the sole, insole, and backing parts from the shoe upper set

The material and part function of a shoe sole die, inner sole or insole die, and shoe upper die may not be the same. Send separate codes, left-right information, sizes, and actual layer structure for lining, counter, and backing parts as well. Approval in one shoe upper set is not cutting approval for another sole material. The direction and face of the material must be preserved along with part pairs in the nesting layout.

How to manage sample approval and revision archives in cutting dies?

Explore other cutting die technical guides

Technical preparation and application guides