ÖZKARDEŞLER · EVA and foam
How should you describe product cavities in EVA and foam insert dies?
A product cavity in inner packaging is more than just a copy of the product's outer silhouette. Product retention, easy removal, and maintaining the correct height inside the box must be designed together. EVA or foam insert cutting dies start with this usage information.
Product placement and removal are two sides of the same issue
Specify which face the product will be placed on, which areas it can be held by, and how it will be removed. Sensitive surfaces, protrusions, and accessories must be marked on the drawing. A cavity that appears very tight and a cavity suitable for the user do not always have the same geometry.
Show finger recesses, separate accessory cavities, and the lid relationship in the same dieline, if any. Sharing the usable internal area of the box alongside product dimensions completes the layout decision.
Clearly show the layer structure
Single-piece foam, layers consisting of different thicknesses, or adhesive combinations may create separate production requirements. Which layer will be through-cut, which area will be hollowed out, and how layers will be aligned must be defined in the drawing.
Specify the layers by code, thickness, and task name instead of just using colors. Showing the sequence in the assembly with a cross-section or a simple diagram makes evaluation easier.
Evaluate the material sample together with the die decision.
The name EVA, foam, and sponge alone does not explain all material properties. Product code, actual thickness, and a sample are required. Density and hardness are not the same measurement; do not deduce one from the other conclusively.
The behavior of the material during and after cutting, the appearance of the edge, and the seating of the product in the cavity are checked on the sample. Instead of using a single general thickness limit or a rule recipe suitable for all foams, proceed with the material of the job.
Prepare for a separator quote
- Dimensions of the product and the inner area of the box.
- Coded layer drawings and thicknesses.
- Material sample, adhesive/lamination information if available.
- Retention, removal, and appearance expectations.
- Machine information and requested production quantity.
Send your product and inner packaging idea together to Özkardeşler. Let us evaluate the cutting geometry of the cavity through real assembly and usage.
Frequently asked questions
Is density information alone sufficient?
No. It is evaluated together with the product description, thickness, and actual material sample.
Does a product photograph replace a cavity drawing?
A photograph explains the product form. Precise geometry and clearances are complemented by a dimensioned drawing and a sample.
