What do we need to know before designing the die?
The flat dimensions of the box, sheet layout, paperboard type, and thickness are the basic starting information. If there are surface treatments such as printing or lamination, they should also be added to the drawing. Grammage alone does not indicate the thickness of the paperboard; evaluation is made with an actual material sample whenever possible.
Why are cutting and creasing evaluated together?
The cutting rule forms the outer contour and necessary openings. Creasing, on the other hand, helps the paperboard fold along the desired line. Creasing rule and counter channel selection depend on the thickness and structure of the material. Instead of assuming a single dimension is correct for all paperboards, the folding result must be evaluated.
What do nicks and ejection rubber do?
Nicks are small connections that help cut pieces remain controllably attached within the sheet. Their position and size are determined by considering transport requirements and subsequent separation processes together. Ejection rubbers help the material release from the rule after cutting. The selection and placement of rubber are handled according to the cutting line and material.
Stripping quality is also part of die evaluation
The separation of unwanted pieces after cutting and the smooth ejection of boxes are part of the production flow. Information on stripping and blanking stations, if any, ensures the assessment of related die and auxiliary tooling requirements. The model of the machine to be used and existing tooling dimensions are important for this reason.
Let us progress together from drawing to quote
Our CAD/CAM team uses EngView Ultimate. Share the technical drawing, material, sheet size, and cutting machine of your project. If the drawing is not ready yet, we can start with dimensions, photos, or sample information. The exact production scope and delivery expectations become clear during project evaluation.
Check dimensions, closure, and print separately during sample approval
The product dimension, inner box dimension, and outer box dimension are not the same thing. If separators or inserts will be placed inside the box, do not evaluate the dieline based solely on the outer dimension. Record which product, paperboard, and file version the acceptance sample belongs to.
Examine the fit of flaps, matching of locks, and product placement in the assembled box. On the flat sheet, compare the positions of windows, printing, and folding lines. Open and closed photos of the same sample make it easier to explain any changes to be made in the drawing.
If there is an issue in the creasing area, share not only the grammage but also the actual thickness, direction, and surface treatment. The relationship between grammage and creasing adjustment and creasing matrix selection elaborate on this check.
Do not mix reorders and revisions in the same file
For repeat productions of the same box, specify the last approved dieline and existing die code together. If the paperboard, lamination, product dimensions, or machine have changed, state this separately in the new request notes. A box that looks identical may have different production conditions.
- New project: Start with the product, intended use, dimensioned dieline, and sample.
- Repeat production: Match the die code, approved revision, and previous successful sample.
- Revision: Mark the changed dimension or line; also check its counterpart in the print file.
The carton box cutting drawing checklist helps you share cutting and creasing layers on the same reference. If any information is missing, let us complete the production scope together before drawing approval.
Frequently asked questions
Does a print PDF replace a die drawing?
If cutting and creasing lines are in the correct scale, clear, and defined on separate layers in the print PDF, it helps with the evaluation. Having the visual does not mean a production-ready technical drawing exists by itself.
Is the same die installed on every BOBST machine?
Machine model, die chase, cutting area, and station features must be checked. Brand name alone does not determine compatibility.