ÖZKARDEŞLER · Magnet applications
Why should you specify the total layer thickness in magnet cutting dies?
The visible face of a printed magnet shows only a portion of the structure to be cut. Magnetic sheet, printing material, adhesive and coating, if any, must be handled together. Clearly write down the sum of these layers and the cutting target in the die request.
Define the layers in order
Share the material code and known layer thicknesses. If total thickness has been measured, state the measurement data; do not record an estimated value as measured. If there is a back face, carrier or protective layer, explain whether these will remain on the die.
Two magnets with the same print appearance may have different material structures. Compare product codes before replacing the new material with a sample left over from a previous job.
Combine contour and print reference
Show outer edge, internal cutout and small details in a separately readable vector drawing. Print-to-cut registration, tight corners and fine extensions must be examined at actual scale. The fact that a photograph looks large does not prove the manufacturability of these areas.
Describe expectations such as the appearance of the cut edge, the part lying flat, and manual separation using a sample. The machine and sheet layout information to be used complete the tooling evaluation. The same rule dimension is not recommended for every magnet.
Add to the quote file
- Dimensioned final contour and print reference.
- Magnetic sheet and all surface layers.
- Total thickness and actual sample.
- Machine, sheet layout, and production quantity.
Forward the drawing and material package of your magnet project to Özkardeşler. Let us evaluate the desired cutting result and tooling scope together.
Frequently asked questions
Is the thickness of the magnetic sheet alone sufficient?
The printing, adhesive, and coating layers entering the cut together must also be specified.
Can a label die be used directly for magnets?
It is not considered equivalent without examining the material structure, cutting target, and machine compatibility.
