ÖZKARDEŞLER · Maintenance and continuity
Cutting die maintenance or a new cutting die? Evaluate the cutting rule and ejection rubber together
When cutting degrades, a complete replacement of the cutting die may not be necessary. However, simply replacing the visible ejection rubber may not solve the issue either. The maintenance decision gains meaning when the existing cutting die, new job, and the symptom in production are examined together.
First ask whether the job has changed
Working under the same cutting die name does not mean working with the same material and the same product. If the paperboard series, liner, coating, dimensions, or machine has changed, add this to the maintenance log. Design revision and wear must be separated from each other.
The old approved file, cutting die label, and current layout should be seen together. Verifying the file version on re-orders helps prevent a sound cutting die from being used for an incorrect revision.
The task of the ejection rubber is not just to fill the gap
Proper rubbering contributes to holding the sheet, releasing it without catching on the cutting die, and controlled sheet movement. Profile, layout, and material properties are selected together. The color of the rubber is not proof of the same hardness or the same usage among different manufacturers.
Permanent crushing, tearing, detachment, or the cut sheet staying on the cutting die requires inspection. The cutting-rule line, contour, operating conditions, and counterplate are also evaluated in the same check. Giving a single height or replacement time to apply to all rubbers is not correct.
Describe the scope of repair in writing
A local rule or rubber intervention and the complete reworking of the base and a wide contour group are not the same job. In the maintenance request, which lines will be changed, which parts will be preserved, and how sample checks will be performed must be clarified.
Do not look only at the repair cost when evaluating expenses. Re-setup, potential downtime, production quantity, and the technical requirements of the new job also enter the decision. These items are compared with actual records; there is no general rule that "a new cutting die is always cheaper."
Which records help with inspection?
- Cutting die code, last approved layout, and revision date.
- Close-up of the defective sheet and faulty area.
- General appearance of the cutting die, cutting-rule and rubber condition.
- Machine, material, and recent modifications.
- Requested new production quantity and delivery expectation.
Reach out to Özkardeşler with these records. Let us clarify the scope of maintenance or a new cutting die together based on the condition of the current cutting die.
Frequently asked questions
Can the suitable profile be understood from the rubber color?
Technical selection cannot be made by looking solely at color without knowing the manufacturer and product series.
Can the old cutting die be used for the new material?
First, the new material, machine compatibility, and expected result are evaluated. The old production record is a reference, not an automatic approval.
