ÖZKARDEŞLER · Bag applications
Describe the finger hole and tear-off line separately in bag cutting dies
The handle cutout on a bag and the line requested to separate in a controlled manner serve different tasks. Instead of simply saying "bag blade" when requesting a die, it is necessary to show which area will be completely cut and which connection will remain.
Show the finished product and the process sequence
Specify whether the flat, folded or multi-layered version of the bag will enter cutting. Dimension the positions of the handle, side gusset, top area and suspension holes, if any, using the same reference. Add the feeding direction of the machine to be used to the drawing.
A photograph of the finished product is the starting point, while a sample of the semi-finished product entering cutting describes the structure the tooling will encounter. The two may not look the same. Face and direction marks on the sample reduce misinterpretation.
Separate through-cutting and knockout expectations
Completely opening the hand hole cutout, removing the cutout piece and subsequently tearing off a line are separate goals. If perforation is desired, the line task and usage method must be clearly written. There is no single cut/tie dimension applicable to every material.
When demonstrating knockout behavior in the sample, explain from which direction and how it is expected to open. The connection to be preserved during use and the connection used for transport during production must not be described interchangeably.
Short package for die request
- Dimensioned contour and the task of each line.
- Material type, film structure and thickness.
- Folded/layered sample entering cutting.
- Machine model, tooling references and quantity.
Submit your drawing and sample to Özkardeşler. Let us review your bag die request for tooling compatibility, part removal requirements and quote scope.
Frequently asked questions
Are the hand hole and perforation the same thing?
No. The area to be completely separated and the controlled tearing line are defined separately.
Is the finished bag dimension alone sufficient?
The semi-finished product entering cutting, layer arrangement and machine information are also required.
