ÖZKARDEŞLER · Cardboard boxes

rigid board and laminated box cutting die: separate the layers

In a rigid box, the greyboard body, outer covering paper and inner lining may require different dielines. Separate jobs where glued layers will be cut together from parts that are cut separately and assembled later. Strawboard, greyboard and laminated structures should not be accepted as having the same cutting behavior just because of similar names.

Specify the folding method in advance

The production layout of a paperboard box that closes by bending and a rigid box built from separate panels is different. In some structures, grooving, routing or a separate operation comes into play; these should not be marked as the same process as a standard creasing line. Thickness, covering and desired edge appearance are evaluated together in method selection.

Check corner and wrap allowances with a sample

How the covering paper joins at the corner and which surfaces it wraps must be visible on the drawing. A too narrow or excessively wide allowance can cause different assembly problems; there is no fixed allowance to be applied to every box. The actual structure formed after gluing and laminating should not be assumed solely from the thickness of a single layer.

Evaluate the set assembled

The seating of the lid and base, partition if any, window and drawer movement are tested together. Specify whether the control dimension belongs to the flat part or the assembled box. Track revisions by separating geometry approval from mass production cutting approval in the prototype. Forward the bill of materials, finished product expectation and actual material together to Özkardeşler.

Checklist for quotation and evaluation

  • Separate dielines for body and covering
  • Layers, thickness and gluing sequence
  • Definition of folding or grooving operation
  • Assembled sample and functional dimensions

Explore other cutting die technical guides