ÖZKARDEŞLER · Paperboard folder
Measure pockets, spines and locks together in pocket presentation folder dies
A presentation folder that closes properly when empty may overflow or spring open when documents are added. In pocket folder cutting dies, the size, thickness and pocket shape of the documents to be placed inside must be defined just like the outer dimensions.
Describe the contents with the actual usage quantity
Share the dimensions, total thickness and layout direction of the pages or brochures that will go into the folder. If there is a business card slot or another attachment, show them on the same plan as well. A designation like just A4 does not explain the entire volume requirement of the folder.
The spine or folding arrangement is evaluated together with the contents. Look at how the lid fits on the folded sample and how the pocket behaves when full.
Make the relationship between pocket and lock visible
Where the pocket flap will sit, which part the lock will work with, and the gluing area must be clear in the drawing. The revision of one area may also affect another interworking line.
If there is pocket bulging or lock opening, mark the area that struggles first. The problem may not stem solely from the outer contour; material, folding and assembly relationships are examined together.
Match the print with the folding line
Text and graphics approaching the inside of the pocket or the spine line are checked together with the final cutting dieline. Compare the open and closed views of the printed sample. Cutting and creasing lines must be defined with separate tasks.
Product information, thickness and surface treatments of the material must be added to the file. Whether the approval sample and the production material are identical should be visible on the record.
Add to file die request
- Dimensions and quantity of the documents and attachments to be placed.
- Dimensioned dieline, pocket and closure details.
- Paperboard, actual thickness and print/coating information.
- Machine, sheet layout and approved sample.
Evaluate your presentation folder cutting die with Özkardeşler along with the actual content. Let us clarify the pocket and closure relationship before production.
Frequently asked questions
Is closing the blank sample sufficient?
It is also necessary to check the sample filled with actual content.
Does only a single line change when the pocket size changes?
Its effect on closure, lid and folding relationships is evaluated separately.
