ÖZKARDEŞLER · Paperboard bag

How are string-handle holes and bottom folds checked in paper carrier bag dies?

The area where tearing starts on a paperboard bag is one of the most valuable records for understanding the problem. The rope hole, top fold, gusset and bottom folding have different tasks; die inspection must be performed by separating these regions.

Define the product to be carried and the handle system together

In addition to the product's dimensions and weight, specify the structure of the handle or rope and how it connects to the bag. If reinforcement is used, show its material and placement in the drawing as well. Only the hole diameter does not describe the entire carrying system.

If there is tearing, record the starting point and the moment of use: while lifting, while carrying, or while placing on the ground? This distinction explains how sample inspection will be established.

Gusset and bottom are checked in the same dieline

Overlapping areas at the bottom, gluing areas and folding order should be legible in the drawing. When the width or gusset of the bag changes, evaluate whether the bottom structure is also affected.

Creasing rules and cutting contours do not have the same task. Explaining which areas will be folded and which areas will be joined ensures that the die and assembly follow the same design.

Record the material and sample together

The exact definition of the paperboard, actual thickness, grain direction and surface treatments are included in the inspection. The gluing and reinforcement arrangement used along with printing and lamination applications must also be specified.

The control sample is prepared with the real rope, real material and target product. The conditions of the carrying test suitable for the project are recorded. A general kilogram capacity for all materials cannot be derived from a single photograph.

Information package for paperboard bag cutting die

  • Finished bag dimensions, gusset and bottom structure.
  • Handle/rope, connection and reinforcement information.
  • Dimensioned drawing, paperboard and surface treatments.
  • Target product, machine and production quantity.

Forward the bag dieline and usage example together to Özkardeşler. Let us evaluate the hole, bottom and folding details on the same die plan.

Frequently asked questions

Is hole tearing just a die error?

Handle, reinforcement, material, usage and geometry are examined together.

Can the same bag drawing be used on different paperboard?

Material change can affect the folding and carrying relationship; it is evaluated with a new sample.

Explore other cutting die technical guides