ÖZKARDEŞLER · Corrugated board
Flute direction and crushing in corrugated board: What information should you share before die manufacturing?
Rotating the same box dieline on the sheet does not only change the layout; it also changes the position of the crease lines relative to the flute direction. In a corrugated board cutting die, the material direction must appear as part of the drawing.
The flute designation does not replace the complete material specification
Flute designations such as E, B, or C are starting information. Actual thickness, layer structure, paper composition, and lamination if applicable are included in the evaluation. Do not assume that every sheet arriving with the same flute designation has identical characteristics.
Indicate the flute direction with an arrow on the sample and specify its orientation relative to the box panels. This way, the design, die manufacturing, and production teams can read the same material in the same direction.
Separate the locations of creasing issues and cutting issues
An uncut corner, surface crushing, and an outer face that opens up when folded are different symptoms. Grouping these under a single "die is not working well" note makes investigation difficult. Photograph the faulty area separately on the flat sheet and the folded product.
Record whether the issue repeats in a single blank, along a creasing direction, or across the entire sheet. If the material batch, lamination, or surface treatment has changed, share this along with the previous production record.
Creasing and rubbering are handled together
The establishment of the crease line is related to the material structure and the counterplate system used. Do not automatically match a system chosen for corrugated board with paperboard calculations. Whether the job is flatbed or rotary is also part of the tooling evaluation.
Rubber profile and layout play a role in sheet retention and release from the cutting die. Trying to resolve the issue simply by increasing pressure may create undesirable effects in other areas. The operator and die maker must evaluate controlled tests in accordance with machine instructions through the same defect log.
Add to your cutting die request
- Flute type and actual sheet thickness.
- Flute and feed direction marked with an arrow.
- Lamination, printing, and coating information.
- Exact machine model and sheet layout.
- Flat and folded sample; close-up views if there is an issue.
Discuss your corrugated board cutting die requirements with Özkardeşler based on material and machine data. While evaluating layout efficiency, let us keep folding and waste stripping requirements in the same file.
Frequently asked questions
Does flute direction only affect strength?
It is also taken into account in folding and layout decisions. It must be evaluated together with the finished box and production conditions.
Can I deduce the exact thickness from the flute type?
Die preparation is based on the actual material information and measured thickness of the product.
Send the flute code and box structure in the same package
Along with designations such as E flute, B flute, C flute, EB, or BC, specify the actual total thickness and the inner/outer liner paper. Kraftliner, testliner, and corrugating medium are not names of the same layer. Product names such as A-box, telescopic box, box with handle, archive box, or shoebox do not describe the dieline on their own. For laminated corrugated board, also include the printed cover and assembly sequence in the record.
rigid board and laminated box cutting die: separate the layers
