ÖZKARDEŞLER · Print and measurement

Print-to-cut register shift: Which references should you check first?

If one edge of the print appears correct while the other edge is shifted, do not decide to modify the cutting die just by looking at a photograph. Verifying that the file, sheet, and machine references show the same job is the starting point of the investigation.

Are the files at the same revision and scale?

Compare the versions of the print design and the cutting die drawing. A window moved or changed later may not match the old cutting contour. Rule out scale differences by checking the reference dimension used in the files.

It is useful to compare the print and the cutting contour in the same workspace. However, harmony in the file does not automatically show that the sheet is transported with the same reference on the machine or that the material has not changed in production.

Record the distribution of the defect across the sheet

Is there a similar directional shift across all blanks, or is only a specific blank affected? Is there a difference between the first sheet and subsequent sheets? To answer these questions, number the blanks and mark the feed direction.

In addition to the general photograph showing the position of the print relative to the cutting line, include close-ups. Since the camera angle can distort measurements, separately mark the critical dimension on the drawing and the sample.

Compare machine and material data together

The mounting and centering references of the cutting die, the preparation of the printed sheet, and the feeding arrangement fall under the same investigation. Record the exact model of the machine and which model the current template belongs to. Adjustments must be handled within the framework of authorized operator and manufacturer instructions.

A new material batch, lamination or a change in sheet condition must also be logged. Attributing every shift directly to incorrect rule bending may overlook another impact during file preparation or production.

Short submission list for technical review

  • Final print PDF and approved cutting layout.
  • Job code, revision date and reference dimension.
  • Feeding direction and numbered defective sheets.
  • General and relevant area photo of the cutting die.
  • Machine model, material and recent modifications.

When you contact Özkardeşler with this information, we can evaluate the issue not just through the statement "there is a shift," but through comparable records. If a die revision is necessary, let us also clarify the lines to be changed on the same record.

Frequently asked questions

Is it sufficient to have the print and cutting layout within the same PDF?

It aids file compatibility; it does not replace the check of machine references and the production sample.

Can the exact shift dimension be taken from a photograph?

The photograph aids diagnosis. Due to perspective and scale effects, critical dimensions are verified with the appropriate method on the sample and drawing.

Explore other cutting die technical guides