ÖZKARDEŞLER · TECHNICAL NOTES

Why does cracking occur in creasing?

Checking actual thickness, grain direction, creasing-to-channel compatibility, and folded samples when evaluating creasing cracking in paperboard packaging.

Cracking seen on the folding line of paperboard packaging cannot be evaluated by looking at a single setting. The structure of the paperboard and the geometry of the creasing matrix must be considered together. This article provides a checklist to begin technical investigation.

1. Do not rely solely on grammage, measure the actual thickness

Grammage refers to mass per unit area and does not replace thickness measurement. Determine the actual thickness of the paperboard to be used before proceeding with creasing and channel selection. Also include the material type in the technical evaluation.

2. Specify the grain direction in the drawing

The position of the folding line relative to the grain direction must be taken into account in the evaluation. Examine folding lines in different directions on the same box separately; do not evaluate the entire box based on the result of a single line.

3. Check the creasing and channel geometry together

The creasing rule creates the area that facilitates folding by pressing the paperboard into its counter channel. Rule thickness and height are evaluated together with channel width and depth. Manufacturer calculation tables help with the initial selection; there is no single dimension applicable to every job independent of material properties.

4. Verify the result on the folded sample

Do not rely solely on looking at the creasing mark on the flat sheet. Fold the sample in the folding direction and shape of production to examine surface integrity, line position, and closing behavior. Samples taken from different layouts help reveal local variations.

What information is required for technical investigation?

Share the technical drawing, paperboard type and measured thickness, grain direction, machine used, current creasing and channel dimensions, and a close-up photo of the folded sample together. Also specify printing and surface treatments.

As Özkardeşler, we evaluate your cutting die requirements along with drawing, material, and machine information. You can submit your project to our team via the quote form.

This is a representative illustration prepared with generative AI; it is not a measured production trial or customer case.

FROM TECHNICAL KNOWLEDGE TO YOUR PROJECT

Bring creasing inspection to your cutting die project

Share the photo of the cracking area, actual paperboard thickness, grain direction, and surface treatment together. Let us proceed on the same sample with machine and counterplate information.

Request a quote with your drawing ↗

Explore other cutting die technical guides