ÖZKARDEŞLER · TECHNICAL NOTES

Inspect the Adhesive on the Label Edge with Cutting and Storage Conditions

Evaluate label adhesive overflow alongside cutting, material, and storage information; also check aged samples.

Residue on the label edge is sometimes noticed immediately after cutting and sometimes during waiting. To evaluate the issue, record the history of the sample and the processing conditions together.

Document the symptom with its location

Edge residue, adhesion in the stack, or difficult separation of the waste matrix may require different checks. Match the initial and aged samples with the same job code. Do not draw a single behavioral conclusion for all materials based on the adhesive family.

Examine cutting and layers together

Share surface, adhesive, and liner information. Evaluate cutting depth, rule condition, and setup changes with authorized personnel. Check material and system compatibility without trying to solve the problem solely by increasing pressure.

Include storage information

Record temperature, winding or stacking conditions, and waiting time. Base decisions on the material manufacturer's storage and processing recommendations. Determine the cleaning method according to equipment and material suitability; do not consider a clean initial sample as proof for the entire usage period.

Let us clarify your needs together

Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.

Explore other cutting die technical guides