ÖZKARDEŞLER · TECHNICAL NOTES

Assess Cutting and Creasing on the Same Sample for BOBST Jobs

Review the cutting outline, crease, counterplate and substrate together. A practical approach from drawing checks to sample approval for BOBST jobs.

A cleanly cut blank becomes a well-closing carton only when its folding behaviour is also suitable. Assessing tooling solely by its outside cutting outline leaves important questions unanswered. On packaging jobs using BOBST equipment, cutting, creasing and the counterplate should be reviewed against the same product, substrate and drawing revision.

Separate the functions in the drawing

Clearly identify cutting, creasing and any perforation lines in the file. A folding line serves a different purpose from a cutting line. Panel widths, flaps, tabs and glue allowance must remain consistent within one master drawing. When comparing the sketch, die and cut sample, preserve these internal relationships as well as the outside shape.

Do not make grammage the only selection criterion

Provide actual substrate thickness, fibre or flute direction, coating and lamination details. Two materials with the same grammage can fold differently. Cutting and creasing elements and the counter-channel must be assessed for the actual substrate and machine arrangement. Example dimensions from another job are not a universal tooling recipe.

Distinguish the counterplate from waste-removal tooling

The creasing counterplate supports formation of the fold; stripping removes waste, while blanking separates the product blanks. Although they may be part of one workflow, their functions are not interchangeable. Check counterplate position, print orientation and the cutting die reference together. Investigate the cause of a poor fold rather than treating additional pressure as the default solution.

Read the sample in its intended use

Inspect the cut edge, crease and position relative to print, then close that same sample. Mark flap tension, panel bowing, coating cracks or glue-area interference on the drawing. If the sample substrate differs from the production substrate, record that limitation in the approval. Keep photographs of the flat blank and closed carton under the same revision.

Share your drawing, substrate sample and observed folding issue with Özkardeşler Ambalaj to clarify the scope of the assessment.

This guide describes conceptual checks. Machine-specific settings and dimensions must follow the relevant technical documentation.

Explore other cutting die technical guides