ÖZKARDEŞLER · TECHNICAL NOTES
From Product Dimension to Dieline: Determine the Reference First
Separate product, inner dimension, and material thickness before starting the box dieline; verify allowances with a physical sample.
Transferring product dimensions directly to the box panel does not guarantee a correct dieline. Box function, material thickness, and target dimensions in the folded state must be defined together.
Write down what the dimension describes
Provide unit and orientation information for width, length, and height. Specify product dimension, finished inner dimension, and outer dimension separately. Record product protrusions and placement style into the box; determine required clearance based on application rather than a general constant.
Evaluate allowances according to structure
Plan panel, lid, and gluing areas according to the selected box type. Take material thickness and folding behavior into account. Adding the same amount to every crease or proportionally enlarging an existing box may not yield the correct result in the new structure.
Complete the drawing with physical control
Clearly separate cutting and folding functions in the file. Examine product fit, closure, and flap overlaps in the sample prepared with actual material. Match the approved revision with the production-basis file; using the same file does not eliminate the need for production control.
Let us clarify your needs together
Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.
