ÖZKARDEŞLER · TECHNICAL NOTES

Write Reference, Method, and Acceptance Range Together in Dimension Checks

Define scale, reference, acceptance range, and material conditions together in cutting die and part measurements.

To properly evaluate a dimension, how it is measured must be known as well as the target value. Standardize the control setup during the drawing and sample stage.

Verify the file scale

Add unit and control measure. Reopen the exported file and compare it with a known dimension. Determine whether an open contour is due to a functional requirement or an error; do not automatically close all open lines.

Determine the acceptance condition

Define critical dimensions and applicable tolerances based on function. Explain general acceptance rules that also apply to other dimensions. Consider the contact force and support method used when measuring flexible parts.

Record the result in the appropriate state

Different checks may be required for flat parts, folded cartons, or assemblies. Match the sample identity, material batch, and measurement method with the result. Support first-piece validation with an appropriate control plan throughout the series; do not generalize the conformity of a single sample to the entire production.

Let us clarify your needs together

Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.

Explore other cutting die technical guides