ÖZKARDEŞLER · TECHNICAL NOTES
Sheet Label Layout: Plan Area and Waste Together
Clarify the layout decision by evaluating usable area, label spacings, and cutting tests together in sheet label cutting dies.
Fitting more labels onto a sheet does not mean efficient production on its own. The number of usable labels remaining after cutting and the separation behavior of the waste are also part of the layout decision.
Determine the usable area
Separate the area that can be used in production from the raw sheet dimension. Include the zones required for the feeding edge, side references, and print marks in the plan. Verify the margin allowances with current production conditions instead of carrying them over directly from a previous job.
Proceed from a single main contour
Approve the label dimension, corner form, and orientation; duplicate the ups from this master drawing. If the print imposition is ready, compare the cutting lines with all ups. Check that a correction made only on the first label has been applied to the others as well.
Evaluate the spacing together with production
The gap between labels is also a part of the waste to be stripped. Narrow spacing may consume less area; however, it can make waste separation difficult. Factor in the preservation of the backing sheet in kiss-cutting and the collection of pieces in through-cutting.
Extend the trial to the entire sheet
Examine the corner, edge, and middle ups separately. Check the dimensions, edges, and separation of the labels. When comparing layouts, record not only the number of ups but also the accepted product quantity and stripping losses.
Add to your preparation file
• Dimensional label contour and current layout.
• Sheet dimension and usable area.
• Material, cutting type, and feeding direction.
• Order quantity and trial notes if any.
Share your label drawing and sheet plan with Özkardeşler; let us clarify the layout needs together.
