ÖZKARDEŞLER · TECHNICAL NOTES

Part Matching in Footwear Upper Cutting Dies: Right-Left and Inner-Outer Checks

Reduce pre-production uncertainties by checking right-left matching, inner-outer part separation, and orientation information in footwear upper cutting dies.

Ensuring the outer contour of a footwear upper part is correct does not alone indicate that the tooling matches completely and accurately. Right-left information, inside-outside distinction, and material grain direction must be evaluated together.

Ensure every part has a clear identity

Match the model code, number, part name, and quantity information with the current drawing. Define interior and exterior parts with separate codes. Thus, the position where seemingly similar parts will be used can be clearly read from the file.

Let the drawing determine the mirroring decision

Right and left parts may be mirrors of each other in some models. However, stitching, reinforcement, or connection details may differ. Instead of automatically reversing a part, verify both directions through the approved drawing. Also, specify which face the drawing is shown from.

Preserve orientation and face information

The face and placement direction of the leather or synthetic material can affect the use of the cut part. Relate the orientation marks and face notes in the file with the part code. Clarify ambiguous marks before proceeding to production.

Check the tooling together during the first cut

Examine the first right-left pair side by side; compare part identity, dimension, orientation, and critical references with the approved file. If there is a discrepancy, re-evaluate the drawing and die match before moving to serial cutting.

Include it in your order file

• Current model and revision code.
• Number, parts list, and quantities.
• Right-left and inside-outside definitions.
• Material sample, face, and orientation information.

Share your parts list and approved drawing with Özkardeşler; let us clarify your cutting requirements together.

Explore other cutting die technical guides