ÖZKARDEŞLER · TECHNICAL NOTES

Track Label Defects with Directional Up-Map

Record defect positions in label cutting using feed direction and up-codes; perform a controlled comparison across consecutive sheets.

Seeing where the same symptom recurs makes the investigation more orderly. Position logging should be used as a comparison tool rather than a definitive diagnosis on its own.

Establish a shared map.

Mark the feed direction and define cavities using row-column codes. Write down missing corners, difficult stripping, and liner damage separately. Ensure that the mark does not obscure the defect; document consecutive sheets in the same direction.

Compare fixed and changing symptoms.

Examine the rule, seating, and cutting surface at the repeating position. For shifting symptoms, also compare feed and material information. Do not interpret a fixed position solely as proof of the cutting die or a variable position solely as proof of the machine.

Proceed with a single variable.

After recording the current state, make controlled changes with the technical team. Fill out the same map again. Match the cutting die photo, material batch, and setup notes with the result; do not combine carrier damage and incomplete cutting under a single issue heading.

Let us clarify your needs together

Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.

Explore other cutting die technical guides