ÖZKARDEŞLER · TECHNICAL NOTES

Verify Corner Shape with Material in Transparent Plastic Cutting

Evaluate corner shape, edge quality, and usage conditions together with the sample in PVC, PET, and acetate cutting.

In transparent plastics, corner and edge quality must be examined together with the application behavior of the part. The material name alone does not determine the appropriate radius or cutting method.

Evaluate geometry according to function

Mark narrow internal corners and stress-concentration zones on the drawing. Discuss the rounding option together with assembly and appearance requirements. Do not use a blanket lower radius or thickness multiplier applicable to all plastics.

Record the cutting symptom

Photograph the area where whitening, crack initiation, or roughness is observed. Add material code, thickness, batch information, and cutting condition. Examine surface and edge together without considering a single white mark as the definitive cause of failure.

Verify usage conditions

Evaluate the sample not only at the moment of cutting, but also under required folding and usage conditions. Define the test method and acceptance criteria for the project. Re-check the validity of the previous result upon material change; do not consider a neat initial edge as a guarantee of long-term durability.

Let us clarify your needs together

Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.

Explore other cutting die technical guides