ÖZKARDEŞLER · TECHNICAL NOTES

Check Label Separation and Liner Integrity Together in Kiss-Cutting

Evaluate face stock separation and liner integrity together in label kiss-cutting; re-verify setup when changing materials.

The purpose of kiss-cutting is to protect the carrier during use while releasing the label in the desired form. Easy peeling of the label is not proof of a proper cut by itself.

Share layer information

Specify the face stock, adhesive, and liner type, thickness data, and lamination if any. Record the material batch. When the liner changes, do not assume a label with the same name will give the same result as the previous setting.

Relate the symptom to the layout

Mark areas with carrier damage with directional sheet or roll records. Examine general and regional symptoms separately. Distribution guides the investigation; it does not constitute a definitive diagnosis originating solely from the cutting die or machine.

Complete release and usage control

Check label release, waste matrix behavior, and damage on the carrier using an appropriate method. Do not consider visual inspections such as back-lighting sufficient on their own. Setup and cleaning must be carried out by authorized personnel; approval records must be kept together with material and processing conditions.

Let us clarify your needs together

Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.

Explore other cutting die technical guides