ÖZKARDEŞLER · TECHNICAL NOTES
Evaluate Rubbering Plans with Material and Ejection Behavior
Evaluate material, layout, and recovery together in die rubbering; record surface marks and ejection issues.
The release of the cut part from the die is as important as the cutting edge. The selection and placement of the ejection rubber must be evaluated based on the material and operating conditions.
Verify profile information
Check the hardness scale, height, and compression characteristics of the rubber against supplier data. Color or a general Shore range is not proof of suitability on its own. Share the thickness and surface sensitivity of the material to be cut together.
Examine contact and clearance
Rubber placement should be arranged according to the rule line, expansion, and sensitive areas. Filling every small window in the same way or applying a single spacing to the entire die may not be correct. Record unwanted marks by their location on the sample.
Do not attribute the issue to a single cause
In case of wrapping or difficult release, examine cutting, material, and machine conditions alongside the rubber. Authorized personnel must perform checks during a safe stop. Log changing profiles and zones into the die record; ensure the result is re-verified under production conditions.
Let us clarify your needs together
Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.
