ÖZKARDEŞLER · TECHNICAL NOTES

Clearly Write the Layer to Be Cut and Protected for Kiss-Cut

Specify face and adhesive cutting, liner protection expectations, and application conditions together in label kiss-cut requests.

Kiss-cut is a cutting approach that enables the removal of the label and protects the liner for use. Success cannot be described with a single cutting-rule height alone.

Define the target layer

Share the face material, adhesive and liner information. If there are places where through-cutting is desired, separate them from kiss-cutting. Verify the machine and tool requirement of the sheet or roll system; do not transfer a dimension given for one method to the other.

Evaluate the rule and setting together

Handle the height, thickness and bevel structure with the operating system. Recheck the old setting upon material change. Keep a position record when separation or liner damage is observed at different points; do not reduce the problem to a single dimension.

Test the end use

Specify the expectation for manual peeling or application machine. Evaluate the separation of the waste web and liner integrity with appropriate control. Plan in-process checks alongside the first sample; store the approved conditions together with the material code.

Let us clarify your needs together

Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.

Explore other cutting die technical guides