ÖZKARDEŞLER · TECHNICAL NOTES
Point Size and Height in Cutting Rules: Define Technical Dimensions Accurately
Learn the difference between point size and height in cutting rules; clearly define dimensions, line types, and material information in your order file.
Proper cutting die preparation begins with dimensions meaning the same thing to everyone. Specifying rule height and point size separately facilitates technical evaluation and reduces uncertainty.
What dimension does point size describe?
Point size refers to the thickness of the steel rule. For example, 2 pt corresponds to approximately 0,71 mm, and 3 pt corresponds to approximately 1,07 mm in thickness. In addition to the nominal value, the manufacturer's technical definition should also be checked upon ordering. A thicker or thinner rule does not inherently mean superiority for every application.
Where is height measured from?
Height is the total measurement from the bottom edge of the rule to the cutting tip. It should not be confused with the portion visible above the cutting die surface; the visible protrusion depends on how the rule is seated in the base. Therefore, instead of determining dimensions from a photograph alone, technical information or a sample should be used.
Give a separate definition to each line
Cutting, creasing, and perforation lines serve different functions. Specify the type of each line in the drawing; match the relevant height and thickness information with that line. Do not assume a single dimension will apply to the entire cutting die.
Quick pre-order check
• Height: In mm, clear value.
• Thickness: In points and verified mm equivalent if applicable.
• Line type: Cutting, creasing, or perforation.
• Application: Material, thickness, through-cutting or kiss-cutting expectation.
• File: Dimensioned drawing and current revision information.
Share your project drawing and material information with Özkardeşler so we can clarify the technical requirements together.
