ÖZKARDEŞLER · TECHNICAL NOTES
Flute Direction and Load in Paperboard Displays: Plan Layout with Usage
Evaluate part direction, product information per shelf, and interlocking details in the paperboard display cutting die through a load test conducted with actual material.
The external dimensions of a paperboard display being correct do not alone demonstrate that it will carry products throughout use. Shelves, side panels, supports, and connections must be evaluated together.
Define the requirement per shelf
Record the product quantity, weight, and placement on each shelf. Show in the drawing how the product transfers load from the shelf to supports and the base. Looking only at total weight can miss stress occurring in a specific region.
Specify the flute direction on a part basis
Mark the directions of the main body, shelf, and supports separately in the drawing. Evaluate the effect on transport and folding behavior before rotating the part to place it more tightly on the sheet. Do not assume the same direction is suitable for all parts.
Test interlocks with actual material
Check that slots and locks fit during setup without crushing the rigid board. Overly tight or loose joints can lead to different problems in use. Re-verify the previous sample result when material thickness and conditions change.
Make the proofing repeatable
Evaluate the assembled sample with the target product layout. Record the waiting time and ambient conditions; monitor shelf sag, joint opening, and panel deformation. Determine acceptance criteria according to project needs. The result of a single sample is not a general capacity guarantee for different materials and layouts.
Share for evaluation
• Current part drawings and flute directions.
• Product quantity, size, and weight per shelf.
• Rigid board information and setup sequence.
• Sample, duration of use, and proofing records.
Share your dieline and product information with Özkardeşler; let us clarify your cutting and layout needs together.
