ÖZKARDEŞLER · TECHNICAL NOTES

Tear Control in Paperboard Bags: From Cord Attachment to Bottom Fold

Evaluate cord holes and bottom tears in paperboard bags through sample inspection performed with the actual cord, reinforcement, paperboard properties, and product.

The endpoint of a tear in a paperboard bag may not be the same as the area where the damage started. The cord attachment, top turn-in, gusset and bottom should be examined separately. Recording the initial whitening or fiber separation helps make an accurate assessment.

Inspect the cord hole along with its attachment

Evaluate the thickness of the cord, the direction of passage and the fixing method alongside the hole diameter. If there is a reinforcement, check the alignment of its holes with the body. The distance of the hole from the edge and the cleanliness of the cut must also be examined on the same sample.

Observe the top turn-in and gusset

The fit of the turn-in, the position of the reinforcement and the folding sequence can affect the transfer of the load to the body. Monitor whether any difficulty occurs at a specific crease when opening the bag. Add the grain direction and surface treatment of the paperboard to your evaluation notes.

Distinguish between two different defects at the bottom

Fiber separation along the crease is not the same thing as the opening of the glued flap. State whether the damage started at the cutting edge, fold line or gluing line. Also observe the seating of the product on the base and the distribution of its weight.

Make the mock-up with real components

Prepare a sample using the production paperboard, cord, reinforcement and planned attachment method. After filling it with the target product, record the marks formed during lifting and releasing. The result should be evaluated only for the tested sample and conditions.

Share for evaluation

• Current cutting and creasing drawing.
• Paperboard, surface treatment and grain direction.
• Cord, reinforcement and defective bag sample.
• Product dimensions, weight distribution and usage notes.

Share your bag drawing and sample with Özkardeşler; let us clarify cutting and folding needs together.

Explore other cutting die technical guides