ÖZKARDEŞLER · TECHNICAL NOTES
Determine the First Contact Point in Lid Interlocking
If the box lid does not close, examine the first contact of the flap, dust flap, and main lid with the actual paperboard and folding sequence.
The failure of the flap to close does not indicate that the entire box dimension is wrong. Finding where the first contact occurs on the folded piece makes the evaluation concrete.
Observe without forcing
Fold the box in the intended sequence. Photograph at which point the glue flap, side flap, or main tab gets caught. Match this point with the current drawing; do not rely solely on the clearance in the flat drawing.
Evaluate while protecting the glue area
Shortening the flap may change the movement, but it can also reduce the joint area. Share the gluing method and machine condition. Evaluate paperboard thickness and coating on the actual sample; do not suggest a fixed flap width.
Transfer the revision to the entire layout
Clearly record the modified edge and the expected result. Update the other up positions of the same box as well. Recheck closure, body layout, and assembly; do not assume that a geometry revision automatically resolves a glue or machine setting issue.
Let us clarify your needs together
Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.
