ÖZKARDEŞLER · TECHNICAL NOTES

Define Internal Area and Outer Boundary Separately in Boxes

Separate product, inner dimension, outer dimension, and dieline measurements in box requests; verify conformity with the actual material and physical sample.

The same width, length, and height expression may describe different measurement points. It must be clear whether the request specifies the product dimensions, the usable inner area of the box, or the outer boundary.

Describe the usable area

Evaluate the product protrusions, insertion direction, and clearance allowance. If there are partitions or internal supports, check the usable volume together with them. State the outer dimension separately for shelf, shipment, and stacking arrangements. Do not confuse the dimensions of the flat blank piece with the assembled box dimensions.

Maintain the target when changing materials

Thickness, overlap, and folding geometry affect the inner-outer dimension relationship. Do not use a single clearance formula that fits every box. If the material is going to change, clearly define which inner area and which outer boundary must be preserved on the technical drawing.

Approve the sample with a measurement plan

Base it on the actual product and the paperboard to be used in production. Measure from the same reference points after assembling the box; test insertion, clearance, and closure. Do not confuse the inner-outer difference resulting from design with production variation. Keep the approved revision and sample together.

Let us clarify your needs together

Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.

Explore other cutting die technical guides