ÖZKARDEŞLER · Wood laser cutting

Contract wood laser cutting: how to choose plywood and drawings

Özkardeşler offers custom wood laser cutting services. Preparing rule channels of a cutting die and cutting the outer contour of a decorative or functional wooden part are different tasks. The compatibility of the channel with the steel rule in the die carrier; and the outer dimension, surface, and edge expectations in the finished product stand out. Indicate which one the request is along with the drawing.

Share more than just the plywood name

Birch or poplar information is a starting point; layer structure, glue, internal voids, surface coating, and actual thickness are also evaluated. For our die carrier jobs, we base our work on a structure suitable for laser cutting and MR glue requirements; thicknesses we frequently use are 8, 10, 12, 15, 18, and 21 mm. These are not automatic acceptances or single-pass cutting guarantees for every file.

Confirm material suitability

A marine or moisture-resistant label alone does not show that the plywood is suitable for laser cutting. Do not consider a sheet whose adhesive and coating information is unknown as equivalent. For MDF, solid wood, Formica, or other sheet requests, material information and samples are examined separately. The method, edge darkening, and surface expectations should be discussed according to the job.

Clarify geometry and cutting allowance together

In the dimensioned vector drawing, closed contours, internal voids, direction, and quantity should be clear. In interlocking parts, compare the nominal drawing dimension with the actual cutting result on the sample. Do not consider the allowance to be applied to the die channel and the allowance of the interlocking part as the same recipe. You can clarify the scope by submitting the drawing and actual sheet information via the quote form.

Checklist for quotation and evaluation

  • Die carrier or finished part purpose
  • Sheet type, glue, coating, and actual thickness
  • 1:1 drawing, internal contours, and quantity
  • Edge appearance, interlocking, or rule channel expectation

Explore other cutting die technical guides