ÖZKARDEŞLER · TECHNICAL NOTES

Evaluate Flute Direction Along with Panel Function

Plan flute direction, folding lines, and panel function together in corrugated board; verify with the sample.

Direction information in corrugated board is a technical input of the sheet layout. Sheet gain obtained by rotating the material should not be evaluated separately from the function of the product.

Describe the direction correctly

Show the axis of the flute channels in the drawing. This direction is not the same explanation as the direction in which the wavy line seen in the section progresses. Record the flute type, material structure, and direction on the sheet.

Examine the panels with their function

The requirements of load-bearing, folding, and locking areas may differ. Do not assign a single correct direction to all parts. Evaluate cutting, creasing, and surface treatments together with the material structure; verify load adequacy with appropriate testing.

Test again when the layout changes

Check folding, crushing, and surface damage after part rotation or material change. Set up the sample in the target form. Keep the actual flute direction alongside the drawing in the approval record; do not assume that the same outer dimension will provide the same behavior.

Let us clarify your needs together

Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.

Explore other cutting die technical guides