ÖZKARDEŞLER · TECHNICAL NOTES

Internal Waste Control in Gasket Cutting: From Dimensions to Test Results

Evaluate internal waste stripping in gasket cutting through contour geometry, actual material sample, ejection expectations, and cutting tests.

Ensuring a gasket hole is at the correct dimension does not alone indicate that the waste piece in the center will be stripped without trouble. Product dimension and post-cutting stripping behavior are two separate checks that must be examined together.

Clearly define internal cutouts

Separate the outer border of the product, the inner contours to be cut, and the reference lines in the drawing. Indicate which part will remain as the product and which is the waste. Include narrow areas and lines getting close to each other in your evaluation note.

Evaluate with the actual material

Share the thickness and current sheet sample along with the material name. Do not assume the sample used in the previous job represents the new material. Associate the drawing and the sample with the same job record when evaluating interior waste behavior.

Write down the expectation after cutting

Explain whether complete separation of the inner piece or its removal in a subsequent process is requested. Do not describe the evacuation need solely by hole diameter. The appropriate approach must be evaluated together with part geometry and actual cutting conditions.

Record the trial

If jamming is observed, note its location, frequency of recurrence, and the material used. Check the product dimensions, the separation of the inner piece, and the edge integrity separately during the trial. Keep the approved result together with the drawing revision.

Prepare for evaluation

• Dimensioned inner and outer contour drawing.
• Current material sample and thickness.
• Expected product condition after cutting.
• Previous trial and change notes, if any.

Share your drawing and material sample with Özkardeşler; let us clarify the needs for interior waste control together.

Explore other cutting die technical guides