ÖZKARDEŞLER · TECHNICAL NOTES
Distinguish Incomplete Cutting from Planned Nicks
Evaluate whether the remaining connection on the paperboard is a planned nick or an incomplete cut using the sample and approved technical records.
The fact that a cut piece remains attached to the sheet at a small point does not always mean the same thing. The purpose and location of the nick must be compared with the approved design.
First, determine the function of the nick.
A planned nick can help keep the piece held in the sheet during processing. An unwanted incomplete cutting, on the other hand, can make separation difficult. Recurrence at the same point is not proof of a planned nick on its own; an issue at the rule joint can also leave a mark at a fixed position.
Document the sample without separating it.
Keep the unstripped sheet and the separated product together. Match nick locations with the approved nick plan in the drawing. Record premature tearing, fiber tearing, and separation difficulty separately. Check how nicks close to tight interlocking channels affect assembly.
Proceed with local inspection.
Evaluate the rule joint, seating, and cutting surface with the technical team. Do not consider increasing the overall pressure as the primary solution. Log changes in the nick arrangement and verify handling and separation behavior together on the new sample.
Let us clarify your needs together
Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.
