ÖZKARDEŞLER · TECHNICAL NOTES
BOBST Blanking Checks: From Separated Blanks to an Orderly Pile
Assess blanking through edge condition, separation behaviour and pile quality. Keep sample acceptance and repeat-production checks traceable.
Blanking supports the separation of cut products from the sheet and their collection according to the machine configuration. It is different from stripping: one addresses waste areas, the other product blanks. A single neat sample is therefore insufficient evidence of a satisfactory blanking result; product edges and the resulting pile must be assessed together.
Define the delivery requirement before tooling design
Specify how products will be collected, their orientation and the needs of the following gluing or packing operation. Confirm that the machine has the required blanking station and equipment. Review tabs, tongues and delicate corners together with separation openings and supports. Numerical clearances must be verified for the model and job; one value cannot apply to every set.
Check the cleanliness of the incoming sheet
Offcuts and internal waste remaining after stripping can travel into the product pile. A problem that appears to originate in blanking may therefore begin at an earlier station. Identify the affected position and the stage at which the defect first appears. The main drawing, stripping plan and blanking components must follow the same approved layout.
Record edge and pile findings together
Log rubbing marks, fibre tear, crushed corners, rotated blanks and irregular columns as distinct observations. Sample different positions under the same production conditions; one product does not establish conformity across the sheet. Trials must be conducted by an authorized operator following the relevant machine procedure. Use controlled comparisons and records instead of arbitrary changes to pressure or speed.
Carry acceptance criteria into repeat orders
Keep the approved sample, pile photograph, tool identifiers and revision in one job record. If substrate or layout changes, do not automatically extend the old acceptance to the new job. For recurring defects, assess wear on contact and passage surfaces as well. Recheck replacement parts against the existing tooling. Waste, manual correction and stoppage records make the result of a change easier to assess.
Share product samples, pile photographs and the current layout with Özkardeşler Ambalaj to clarify the scope of your blanking assessment.
BOBST is referenced for compatibility. These explanations do not promise a specific speed, zero waste or a guaranteed outcome.
