ÖZKARDEŞLER · TECHNICAL NOTES
Plan Hanger Hole and Fit Together in Blister Packaging
Evaluate the hanger hole, product balance, and seating area with the actual sample in blister cards; verify edge margins according to the project.
Ensuring that a blister packaging stands properly on the shelf requires evaluating the paperboard, transparent part, and product together. Positioning the suspension hole solely according to the visual center of the paperboard may not be sufficient.
Check load distribution on suspension
Examine the suspended posture of the packaging while the product is in place. Verify the hole shape compatible with the hanging hardware and the material remaining above the hole. Total weight, paperboard structure, and layout must be evaluated together; do not use a single edge margin for all jobs.
Define the joining method
Determine how the transparent part will be attached to the paperboard. Describe the adhesion or welding area, the window if present, and the outer contour separately. Do not assume that every blister structure requires a window or that the paperboard and plastic will be cut in the same process.
Examine all three parts in the same sample
Perform a fit check with the actual paperboard, transparent part, and product. Record any strain, paperboard bulging, or gap formation by location. Track hole, corner, and joint revisions on the same drawing; use values verified for the project rather than general dimensions.
Let us clarify your needs together
Share your current drawing, material, and sample information with Özkardeşler; let us evaluate the requirements of your application together.
