ÖZKARDEŞLER · TECHNICAL NOTES

Print PDF and Cutting Line: Pre-Production Matching Check

Check print PDF and the cutting line through the same scale, common reference, bleed area, and current revision to clarify file compatibility.

The fact that the print design and the cutting line appear superimposed on the screen does not by itself show that the files are ready for production. The scale, page boundaries and reference point must be verified together.

Equalize the scale and starting point

Check that both files are prepared at actual scale, 1:1. Compare page sizes, crop boundaries and orientation. State the common reference corner and grip edge in writing; do not evaluate the match using visual centering alone.

Separate technical lines from print

Keep cutting, creasing and perforation lines in separate and clearly named technical layers. Verify the print shop's file and color separation rules to ensure technical lines are not included in print production. A spot color definition alone does not guarantee the line will not print. Reopen and check the exported file.

Read the bleed from the actual contour

Check that backgrounds and artwork extend beyond the cut, and that critical elements like text and barcodes remain within the safe zone. Bleed does not correct print-cut misalignment; required allowances must be clarified according to production conditions.

Manage the revision pair together

Share the print PDF and the cutting drawing in the same revision set. Recheck the match whenever one changes. When archiving older versions, clearly mark the files valid in production.

Pre-submission check

• Common scale, page size and orientation.
• Written reference corner and grip edge.
• Separated technical lines and checked output.
• Bleed, safe area and current revision.

Share your print PDF and cutting drawing with Özkardeşler; let us clarify production references together.

Explore other cutting die technical guides